Utility
Easytagger can offer accurate real time position (latitude, longitude, barometric pressure altitude, and heading) and the precise time (UTM time) information to the cameras which support GPS information direct input. And it also has 2Gb storage space to store trails. All photo files can be recorded with geographical information no matter if it is JPG, TIFF or RAW files. With Window or Mac based software utility such as Locr, Geosetter, Jetphotosoftware, Adobe Lightroom, Nikon capture NX2 etc.. User can easily export the recorded points to Google Earth or Google Maps.
Suitable Cameras
Easytagger can work on Nikon D3X, D3, D700, D300S, D300, D2XS, D2X, D2HS, D200, D90, D5000 and Fujifilm S5 Pro Cameras.
.gif)
Highlight features
l Real time Geographical information into EXIF upon each shooting a photo
l SiRF star III chipset 20 channels
l ARM 32-bit CPU, high performance system, Watchdog timer which is to reset the device when a problem occurs
l Barometric altimeter intergrated
l Built-in 2 axis magnetic sensor to show direction
l 2Gb micro SD card to store at least 3 years waypoints
l Auto geotag indoors by memorise the last received GPS signal when losing satellites
l Very high sensitivity (Tracking Sensitivity: -159 dBm), quick cold start speed.
l Built-in rechargeable battery, automatically powered by camera when in low battery
l Unqiue design allows mounting on flash accessory shoe and the built-in flash to be used at the same time
l In box with 10 pin connector suitable for Nikon D300, D3 etc with 10 pin socket or square connector suitable for Nikon D90 or D5000 with GPS socket
l Use-friendly no Setup Required
l Support Flickr, panoramio, Locr etc.
l Supports work flow
Note: Nikon D200 does not support heading.
We have tested our devices sucessfully on the following Nikon cameras.
Tested on Nikon D3
Tested on Nikon D300s
Tested on Nikon D5000
The GPS will flash steady when get fixed with the satellites which can be shown in the small LCD panel
.jpg)
